|
|
|
|
|
T5V™ Sheaves
|
Features & Benefits
- The Power Drive “T5V™” sheaves have a TRUE 5V groove angle for maximum contact
with the walls of the sheave v-groove.
- The “B5V®” sheaves have a hybrid groove angle. “B5V® ” sheaves accommodate
both B and 5V section V- belts. The groove angle is “split” to accommodate both
belt sections. The result is neither a true B or true 5V groove angle.
- Power Drive “T5V™” sheaves have the same 5V datum diameter as the “B5V®
” sheave. ( NOTE: The advantage of using the “T5V™” as well as the “B5V®
” is to get 5V capabilities at a B section sheave cost—basically there is no savings
when using a B section V-belt in a “B5V®” sheave over a standard B section
TB or B section QD sheave)
- The B datum diameter in the “B5V®” sheave is an industry standard which is available
in both the Power Drive TB and B section QD sheaves.
- Power Drive “T5V™” sheaves runs ONLY with 5V section v-belts.
- If “B” sections belts are required, use either the Power Drive TB or B section QD
sheave to complete the drive. The B datum diameter in both of these sheaves matches
the B datum diameter of the “B5V® ” sheave. The cost will be comparable.
- B split taper bushings are used with the Power Drive T5V™ sheaves.
Note: “B5V®” is a registered trademark of PowerDrive.
|
T5V™ Sheaves
|
|
|